Cutting plotter

01. What is the maximum acceptable media thickness for Redsail cutting plotter? 02. My operating system is Windows XP. Are there any compatibility issues when using Redsail cutting plotter? 03. What is the life of a blade? 04. What kind Sign software come with the Redsail cutting plotter? 05. Can I buy Blade from Redsail? 06. Can I plot paper with Redsail cutting plotter? 07. What kind of software do I need to work with Redsail Cutting Plotter? 08. What are three things to look out for when choosing a Cutting PLotter? 09. I am new to the sign making industry. What model of a cutter do you recommend? 10. How to I update drivers for the Redsail Cutting lotter? 11. How do I install windows2000/Xp driver? 12. How do I install the Flexisign driver? 13. What is the Stanard accessory?

01.What is the maximum acceptable media thickness for Redsail cutting plotters?

0.8 mm (including backing paper)

02. My operating system is Windows XP. Are there any compatibility issues when using Redsail cutting plotter?

Redsail cutting Plotter accept HPGL commands from your computer. The HPGL command language is a widely used graphical language. It is not affected by your operating system. However, the cutting software that you use may have a compatibility issue if it was developed before Windows XP. Sign makers should check with their cutting software supplier for upgraded software in order to resolve any compatibility problems.

03. What is the life of a blade?

Basically, the knife shipped with a Redsail cutting plotter has a 5 mile cutting lifespan. However However, it varies depending on different applications.

04. What kind Sign software come with the Redsail cutting plotter?

Cuttermaster or Artcut.

05.Can I buy Blade from Redsail?

Yes, we can supply the blade.

06.Can I plot paper with Redsail cutting plotter?

Yes, you can do it with a Redsail cutting plotter.

07.What kind of software do I need to work with Redsail Cutting plotter?

All Redsail Cutting Plotter come with a windows2000/XP drivers, which work with Corel Draw. Sign makers can edit their signs with Corel Draw, and then send the data through the driver to the Cutting Plotter, finishing the cutting job easily. There is some software designed specially for vinyl cutting, for example, Flexisign, Artcut, Cuttermaster, Signcut, Singo and etc.

08.What are the things to look out for when choosing a Cutting Plotter?

There are three things sign makers should consider when buying a Cutting plotter. 1. Tracking ability: Better tracking ability means sign makers can make a higher quality and bigger sign during one cutting job when compared with other cutters. Time is money. Better tracking helps sign makers make signs more efficiently. 2. Cutting speed:High-speed cutters make signs faster than slower cutters. Again, time is money. Faster cutter help sign makers make more money. 3. Cutting force:Cutting force: Cutters with higher cutting force can cut on various media. For example, cutting sandblast or reflective material needs a higher cutting force. If the cutting force of the cutter is not high enough, it will limit the sign maker's business to only vinyl cutting.

09.I am new to the sign making industry. What model of a cutter do you recommend?

We recommed the RS720C.

10.How to I update drivers for the Redsail Cutting Plotter?

You can get it from your loal seller.

11.How do I install windows2000/Xp driver?

Please download the windows driver Guide and follow it.

12.How do I install the Flexisign driver?

Please download the Flexisign driver Guide and follow it.

13.What is the Stanard accessory?

(1)Sign software Package(Artcut or CutterMaster English Version) (2)User Manual(CD) (3)Windows2000/Xp driver, come with a dongle (4)RS232 serial cable (5)Power cable (6)3 cutting Blade (7)1 Blade Holder (8)1 Pen Holder (9)1 coat for the plotter (10)1 fuse for the plotter (11)1 stand (only for RS800C/RS1120C/RS1360C)

Laser machine

01. What kind of materials can a Redsail Laser Machine cut or engrave? 02. How do I learn to operate Laser Machine? 03. What kind of software is compatible with the Redsail Laser Machine? 04. What is the cutting capability of the Redsail laser engraving machine? 05. What is the cutting capability of the Redsail Laser Cutting Machine? 06. What is the life of the laser tube? 07. What is the life of the optics? 08. What is the diference between Laser Engraving Machine and Laser Cutting Machine? 09. Which Redsail Laser Machine should I choose? 10. Where can I purchase the laser tube and the Optics? 11. What is the Stanard accessory? 12. Why should I choose a Redsail Laser Machine?

01.What kind of materials can a Laser Machine cut or engrave?

Acrylic, Bamboo, Carbide, Cardboard, Ceramics, Composites, Cork, Fabric, Fiberglass, Foam, Glass, Laminated plastic , Leather, Marble, Matte board, Melamine, Mylar, Nylon, Painted metals, Painted materials, Paper ,Plastic, Polyester, Polyester film, Pressboard, Rubber, Silicon ,Stone and etc.

02. How do I learn to operate Laser Machine?

Once you have chosen to purchase our Laser Machine, we will provide you a user manual, which will guide you through how to unpack the machine, how to install software, and how to operate the software and laser system to make your own laser crafts. We also provide the required training and support when you purchase the Laser Machine.

03. What kind of software is compatible with the Redsail Laser Machine?

The Redsail laser system is compatible with Windows-based graphic programs, such as Corel Draw, Adobe Photoshop, Adobe Illustrator, Auto CAD and etc.

04. What is the cutting capability of the Redsail Laser Engraving Machine?

The Redsail Laser Engraving Machine is good at controlling the motion system and laser driver to achieve cutting of thicker acrylic than any other comparable laser tube wattage. This is definitely a great advantage of Resail laser systems if you are going to use it for cutting jobs. RS3040A 3mm acrylic RS5070A 5mm acrylic RS6090A 8mm arcylic NOTE: the listed cutting capability is for reference only and depends on the different acrylic material supply and customer cutting quality requirement.

05.What is the cutting capability of the Redsail Laser Cutting Machine?

The Redsail Laser Cutting Machine specializes in Cutting. It is the best chocie if you are going to use it for cutting jobs. C80 15~20mm acrylic C120 15~20mm acrylic C150 15~20mm acrylic NOTE: the listed cutting capability is for reference only and depends on the different acrylic material supply and customer cutting quality requirement.

06.What is the life of the laser tube?

Our laser tube is glass tube, the life of it is 3000 hours. this is for reference only and depends on the different maintenance and customer work mode.

07.What is the life of the optics?

The life of it is one year. this is for reference only and depends on the different maintenance and customer work mode.

08.What is the diference between Laser Engraving Machine and Laser Cutting Machine?

The Redsail Laser Cutting Machine specializes in Cutting. The Redsail Laser Engraving Machine specializes in Engraving.

09.Which Redsail Laser Machine should I choose?

Redsail offers customers a full range of laser options, all with complete functionality, including the most smaller laser engraver in the world, DK40A; the largest format system, C150; the most popular system, RS5070A. (1)Dk40A is quite suitable for small items, such as stamps, personalized items or desk accessories. (2)RS3040A is quite suitable for small items, such as little artwork,wood sign bord, photo. (3)RS5070A and Rs6090A with a "500x700mm" and "600x900mm" working area is perfect for large format piece processing, such as textile or leather cutting. they all perform well for general non-metal and anodized materials. (4)C80/C120/C150 with a 80W laser power is quite suitable for cutting arcylic, wood board and etc, it is perfect for large format piece cutting. To determine which Redsail Laser Machine would fit your needs, we need to examine your application requirements. First, you need to consider what kind of application and material you plan to deal with. Once the application is decided, you can consult with us to determine which machine will ful fill your application's needs. We welcome any questions.

10.Where can I purchase the laser tube and the Optics?

Redsail can supply this consumables at low price.

11.What is the Stanard accessory?

(1)1 Water cooling system (2)1 air compressor (only for C80/C120/C150) (3)1 air pump(only for RS5070A/6090A) (3)1 exhaust system (4)1 Laser software (english version) (5)1 User Manual (english version) (6)1 comuniation cable (7)1 Power cable (8)3 reflect optics (9)1 focus optic

12.Why should I choose a Redsail Laser Machine?

(1) Experienced and reliable manufacturer. Several Hundred Redsail Laser Machines have been installed worldwide in the past four years, We invest over 20% of our sales in R&D each year for developing next-generation hardware and software. (2) Low cost laser tube ¡ª the laser tube is the soul of a laser system. The Redsail Laser Machine is equipped with the most reliable laser tube with low cost and stable laser output. Quality and performance is always our goal. (3) Total solution ¡ª Redsail not only offers a full range of features in a laser system, but also provides various optional items, including air compressors, industry Water cooling system an etc. We also have a Laser Processing Center, we are experience in Laser Processing.